This trainer is a single glass epoxy printed circuit board with legends
neatly screen printed in multi colour on the front side and all the
components are soldered on the back side of the pcb to avoid teampering
of fixed components like resistors, capacitors transistors diodes.
Variable components like potentiometers are mounted on the front side
of the PCB for making linear measurements.
D.C. POWER SUPPY
Fixed Voltages : + 5V/1A, + 15V/250Ma, -15V/250Ma are provided in
Variable Voltages : +(0-15)V/250Ma, +( 1.2V-30)V/250 Ma and -(1.2V-30)V/250Ma
are provided in this trainer. Voltage can be varied using the relevant
(30-0-30)V/5Hz A.C . voltage is provided.
Sine square Triangle Ramp Pulse wave forms are provided across output
Amplitude of the signal is varied using " Amplitude Control"
from ( 0-10)V.
Frequency can be linearly varied using frequency control.
Frequency can be selected by using frequency selector.
X1 2Hz - 20 Hz
X10 20Hz - 200Hz
X100 200Hz - 2KHz
X1K 2KHz - 20 KHz
X10K 20KHz - 200KHz
Sine Square Triangle Ramp and Pulse waveforms can be selected with
TTL level ( 3.6) V square wave output can be taken across TTL O/P
Electronic Work station is provided with 3.5" digit DMM for
measuring various voltages.
Fixed components like Higher wattage Resistors, Capacitors, Germanium
diodes, Silicon diodes, Zener diodes, Potentiometers, FET, MOSFET,
LDR, Photo diode, Photo transistor are provided uncommitted for
then students to do patching .
Experimental board is provided for the user to conduct various experiments
in digital and linear Electronics by means of using external components.
Various inputs and outputs can be taken from ' Electronic Work Station"
which is provided in the trainer.
INPUTS AND OUTPUTS
4 logic switches are provided for giving inputs LEDs are provided
for monitoring then logic outputs.
Electronic Work Station is elegantly fabricated and housed in a
brief case for protability.
48cms x 13cms x 41.5cms
(Approx.) 1 KG
230V/50Hz A.C. Mains operated.