Lab breadboard System Trainer is a "6 in
1" system. It provides regulated power supply and inputs signals,
which are most widely used.
1. DC POWER SUPPLIES
it has three IC-Regulated power supplies:
a. +1.2V to +15V (Variable) 500MA
b. -1.2V to -15V (Variable) /500mA for energising NPN, PNP transistor,
op-amps & liner Ics.
c. +5V (fixed)/ 1 A (for Digital ICs)
2. AC POWER SUPPLY
It has a center tapped (15-0-1 5) V power transformer
to conduct halfwave, fullwave bridge rectifiers and voltage multipliers.
3. SINE/SQUARE WAVE SIGNAL GENERATOR
It has two signal sources (i.e.) Sine wave and
square wave. It is intended primarily to test and measure audio
equipment parameters such as input sensitivity, frequency response,
stage gain, distortion and power. The sine/square generator is completely
an IC version and generates frequencies from 1 Hz to 100 KHZ in
X 1 - 1Hz to 10Hz
X 10 - 10Hz to 100HZ
X 100 - 100Hz to 1KHz
X 1K - 1 KHz to 10KHZ
X 10KHZ - 10KHZ to 100KHZ
AMPLITUDE CONTROL - Amplitude varies from (0-10)
V Peak to Peak.
FUNCTION SELECTOR - To select either sine wave or square wave.
4. CLOCK GENERATOR
It has TTL compatible clock generator of exactly
1 Hz (One Second Signal) energising frequency counters.
like 1 K, 5K, 10K, 50, 100K, 470K are provided.
6. BREAD BOARD
This Trainer is provided with 2 breadboards to
construct various circuits with the help of various
Inputs and outputs provided in this trainer.
8. Dimension - 36.5cms x 28cms x 9.5cms
9. Weight - (Approx.) 750gms.
10. Power - 230 VAC Mains operated.