OIL & PETROLEUM TESTING INSTRUMENTS

 

 

 

REDWOOD VISCOMETERS

These viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70. Two adoption of Red Wood viscometer are available No. 1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No. II for liquids whose flow time exceeds 2000 seconds and No. II for liquids whose flow time exceeds 2000    seconds. The complete out fit comprises hammer finished Stainless steel both with  electrical heating arrangement suitable to operate at 220 Volts AC Mains with tap, silver plated oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and M.S. Sheet stand with leveling screws.

 

 

BHI-OPT-01

REDWOOD VISCOMETER NO. 1

PRICE

               01/1

Gas Heated Model

$ 117

               01/2

Electrically Heated Model (Without any control)

$ 125

               01/3

Electrically Heated Model With Energy Regulator control. 

$ 133

               01/4

Electrically Heated With Solid state electronic regulator. 

$ 142

               01/5

Electrically Heated Model With Voltage varier (Copper Coil)

$ 208

 

BHI-OPT-02

REDWOOD VISCOMETER NO. 2

PRICE

 

               02/1

Gas Heated Model

$ 154

               02/2

Electrically Heated Model (Without any control)

$ 158

               02/3

Electrically Heated Model With Energy Regulator control. 

$ 167

               02/4

Electrically Heated With Solid state electronic regulator. 

$ 183

               02/5

Electrically Heated Model With Voltage varrier (Copper Coil)

$ 267

 

BHI-OPT-04

REDWOOD VISCOMETERS MULTIPLE APPARATUS FOR 5 SETS

It consists, Three Red Wood No. 1 cups and Two Red Wood No. 2 cups total 5 Nos. of cups are installed in the bath. The bath is made from Brass and joints are brazed permitted high temperature to be attained. The temperature is Controlled by Electronic Digital Temperature Controller. The Stirring is done by F H P electric motor in the heating compartment, which is separated by a Baffle plate from main bath. The unit has 5 sets of Oil Cup covers, thermometer Clips and ball valve. Suitable to operate on 220 volts AC Circuits.       

 

 

 

REDWOOD VISCOMETER MULTIPLE APPARATUS

$ 708

 

 

MODEL NO.

OPTIONAL ACCESSORIES (FOR RW NO. 1, RW NO. 2 & MULTIPLE APP.)

PRICE

               04/A

IP 8C Redwood Low range Thermometer

$ 6

               04/B

IP 9C Redwood Medium range Thermometer

$ 7

               04/C

IP 10C Redwood High range Thermometer

$ 8

               04/D

Flask Receiver 50ml capacity

$ 6

               04/E

Polish wooden case for Redwood No. 1 Apparatus

$ 33

               04/F

Spare Cup with valve for Redwood No. 1

$ 63

               04/G

Spare Cup with valve for Redwood No. 2

$ 75

               04/H

Polish wooden case for Redwood No. 2 Apparatus

$ 38

               04/I

Spare Heater for Redwood No. 1 Apparatus

$ 17

               04/J

Spare Heater for Redwood No. 2 Apparatus

$ 25

               04/K

Spare Ball Valve for Redwood No. 1 Apparatus & No. 2 Apparatus

$ 4

 

BHI-OPT-06

TAR VISCOMETER MULTIPLE APPARATUS

Consist 6 cups in a S.S. Water Bath mounted on Stand with leveling feet & notched Strip for locating graduated cylinders. Fitted with 1000 watts immersion heater. Temperature is controlled by precision thermostat with  F.H.P. electric motor             Stirrer. Supplied with Six Tar Cups either 10mm or 4 mm orifice with Valves. Please specify size of cups and valves required. (With Glass Receivers).

Tar Viscometer Multiple Apparatus For 6 SETS-         

 

 

 

 

 

 

 

 

$ 625

BHI-OPT-08

TAR VISCOMETER APPARATUS

As per IP-72 and IS 1206 standards. It is used for determination the viscosity of road oils and cut back bitumen. It consists S.S. Bath with cup of 10 mm or 4 mm orifice and sleeve, Stirrer with lifting clip and ball. The assembly kept  on Suitable  stand with leveling Screws. Suitable to operate on 220 Volts AC Mains.

 

 MODEL NO.

REDWOOD VISCOMETER NO. 1

PRICE

                08/1

Electrical Heating (Without any Control)

$ 100

                08/2

Electrical Heating with energy Regulator Control

$ 108

                08/3

Electrical Heating with voltage varier Control (Copper coil)

$ 196

 

 

 

 

 


 

MODEL NO.

OPTIONAL ACCESSORIES FOR TAR VISCO METER APP.

PRICE

               08/A

Spare Silver Plated Cup 10mm or 4mm orifice

$ 33

               08/B

Measuring Cylinder 100 ml cap.

$ 9

               08/C

Thermometer IP 8C Low range

$ 6

               08/D

Thermometer IP 9C Medium range

$ 7

               08/E

Thermometer IP 10C High range

$ 8

               08/F

Polish Wooden case

$ 33

 

BHI-OPT-010

ENGLER VISCOMETER APPARATUS

As per IP 212 and ASTMD-490. Used for determining the Viscosity of      lubricating and fuel oils. It consists S.S. Water Bath having Oil Cup with lid. The water Bath Stirring device mounted on stand. A Thermometer clip to the Water Bath and the Oil  Cup lid has a thermometer socket. The bath is fitted      with 500 glass wares). Suitable to operated on 220 volts A C mains.

 

 

MODEL NO.

DESCRIPTION

PRICE

             010/1

Electrical Heating without regulator

$ 100

             010/2

Electrical Heating with energy Regulator Control

$ 108

             010/3

Electrical Heating with voltage varrier Control (Copper coil)

$ 196

 

MODEL NO.

OPTIONAL ACCESSORIES

PRICE

             010/A

Spare ebonite Valve

$ 5

             010/B

Spare Wooden Valve

$ 4

             010/C

flask 200 ml. capacity

$ 13

             010/D

Wooden case for above Apparatus

$ 33

 

BHI-OPT-012

SAYBOLT VISCOMETER APPARATUS   

Made as per ASTMD-88 specifications with Universal and Furol Jets      made of Stainless Steel, Stirring is done by hand with turn table  arrangement  (without Strainer, with drawl Tube and glass wares).      Suitable to operate on  220 Volts AC mains.

 

 

MODEL NO.

DESCRIPTION

 

             012/1

Elect. Heating with Energy Regulator control

$ 117

             012/2

Elect. Heating with copper coil Voltage varrier control

$ 208

             012/3

Two Saybolt Tubes Viscometer Elect. Heating with Control Panel (Double Walled)

$ 333

             012/4

Four Tubes Apparatus

$ 408

 

 

 

MODEL NO.

OPTIONAL ACCESSORIES

 

             012/A

Strainer for filtering oil

$ 17

             012/B

Withdrawal Tube (Metal)

$ 6

             012/C

Spare Cup without Jets

$ 25

             012/D

Spare Jet Universal

$ 6

             012/E

Spare Jet Furol

$ 6

             012/F

Flask 60 cc.

$ 6

             012/G

Polish Wooden Case for above App.

$ 33

             012/H

Thermometer

$ 6

 

BHI-OPT-014

ABELS FLASH POINT APPARATUS   

 

This apparatus is suitable for determining the close cup flash point of        Petroleum and mixtures according to IP 170 and also IS 1448 (Part I)        1985 (P:20). It is suitable for oils whose flashes below 70C. It is        supplied  with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for      operation on 220 Volts AC Circuits.

 

 

MODEL NO.

ABELS FLASH POINT APPARATUS

 

             014/1

Abel Flash Point Apparatus Temp.

rang - 20 C to + 70 C with refrigeration system as per 170 with oil test jet/gas test jet.

$ 1583

             014/2

Abel Flash Point Apparatus with Oil Test Jet Electric

heating  with energy Regulator control

$ 117

             014/3

Abel Flash Point Apparatus with Oil Test Jet Electric

heating  with energy Regulator control and Concealed Hot Plate

$ 129

             014/4

Abel Flash Point Apparatus with Oil Jet Electric

Heating  with VOLTAGE VARRIER COPPER COIL.

$ 208

             014/5

Same as above but TEMP. CONTROLLED BY DIGITAL TEMP. INDICATOR

 

$ 271

MODEL NO.

OPTIONAL ACCESSORIES

 

            014/A

Abel Oil Cup thermometer with Brass Collar

$ 7

            014/B

Abel Water Bath thermometer with Brass Collar

$ 6

            014/C

Polish Wooden case

$ 29

           014/D

Spare cup for above Apparatus

$ 25

            014/E

Spare top (Cover Assemble) with Shutter mechanism

$ 46

            014/F

Spare Nichrome Heating element

$ 5

            014/G

Pendulum for Measuring Time in Strokes

$ 15

            014/H

Thermometer IP 74 C Wide range

$ 7

            014/I

Thermometer IP 75 C wide range

$ 6

 

BHI-OPT-016

PENSKY MARTEN FLASH POINT APPARATUS   

 

This apparatus is made as per IP 34, ASTMD-93-58 T and IS 1448 (Part I) 1270 (P.21) and IS 1203-1953 method B. The apparatus consists of brass test cup with handily removable cup cover with spring operated rotating Shutter having pilot jet, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated Handle and locking arrangement near Cup flange. The assemble is kept on        round shape electric heater with temp. regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits

 

 

MODEL NO.

PENSKY MARTENS FLASH POINT APPARATUS

 

             016/1

Semi Automatic Flash Point Apparatus with Electronic Temperature Controller Digital Indicator and Automatic dipping cycle

$ 1458

             016/2

Fully Automatic Flash Point Apparatus with Dipping cycle and Automatic Flash Point Indicator system

$ 2708

             016/3

Pensky Marten Flash Point App. with Oil Test Jet electrical Heating with energy Regulator fitted with Motorized FHP Electrical Stirrer with stand.

$ 208

             016/4

Pensky Marten Flash Point App. with Oil Test Jet electrical Heating with energy Regulator Control

$ 125

             016/5

Pensky Marten Flash Point App. with Oil Test Jet electrical Heating with energy Regulator Control with Concealed Hot Plate.

$ 142

             016/6

Pensky Marten Flash Point App. with Voltage Varrier Copper Coil with Concealed Hot Plate

$ 250

             016/7

Same as Above but fitted with Elect. Driven stirrer.

$ 317

 

MODEL NO.

OPTIONAL ACCESSORIES

 

             016/a

Open clip for Converting Close Model To Open Cup test Model as per IP 35

$ 42

             016/b

IP 15 C Low range thermometer with Brass Collar

$ 6

             016/c

IP 16 C High range thermometer with Brass Collar

$ 7

             016/d

Polish wooden case

$ 33

             016/e

Spare Cup with Handle

$ 29

             016/f

Spare Cover Assembly

$ 75

            016/g

Spare Nichrome heating element

 

$ 5

 


 

BHI-OPT-018

CLEAVELAND FLASH POINT &  FIRE POINT APPARATUS

This apparatus is used for determination of flash point and fire point of petroleum products except fuel Oil with open cup flash below 80 C as per specification IP 36 and IS: 1448 ( P: 69) 1969. The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for operation on 220 Volts 50 cycles AC Circuits.

 

 

MODEL NO.

CLEAVELAND FLASH POINT APPARATUS

PRICE

018/1

Cleaveland flash point & fire point Apparatus

$ 75

018/2

Same as above-But oil wick Arrangement.

$ 75

018/3

Cleaveland flash & fire point Apparatus voltage Varrier (Copper Coil)

$ 175

018/4

Thermometer IP 28C range-5C to 400C

$ 5

018/5

Polish Wooden Case

$ 29

018/6

Spare Cup with Handle

$ 33

018/7

Spare Nichrome element

$ 5

018/8

L.P.G. Test flame container

$ 54

018/9

Concealed type Hot plate

$ 21

 

BHI-OPT-020

SOFTENING POINT APPARATUS

(RING & BALL APPRATUS)

 For determination of softening point of bituminous materials according to IP 58 and IP 1206-1958. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimensions to fall a required distance under test condition. The apparatus consists of glass beaker, ring Stand, two steel balls with ring and ball    guides, hand Stirrer.

 

 

MODEL NO.

DESCRIPTION

 

              020/1

Softening Point Apparatus (without Glass Beaker)

$ 29

            020/2

Softening Point Apparatus with glass Beaker

$ 33

            020/3

Softening Point Apparatus 4 Tests (without Glass Beaker)

$ 38

            020/4

4 Test Model with Beaker

$ 75

            020/5

Softening Point Apparatus with F.H.P. elect. motor driven Stirrer and electric heater with temp. Regulator Control.

$ 133

            020/6

Thermometer IP 60C

$ 5

            020/7

Thermometer IP 61C

$ 6

            020/8

Spare Ring with Ball Centering Guide and Steel Ball (pack of 2)

$ 17

 

BHI-OPT-022

CLOUD AND POUR POINT APPARATUS

 

 This is made according to specification laid by IP 15 & IS 1448 (P: 10)  1970. The pour point is lowest temperature at which the oil will just fail to flow. The apparatus Consists main cooling bath made out of S.S. sheet and stand unit with drain plug and cover has provision for fitting thermometer and a filling aperture for adding freezing mixture. A Glass jar for containing oils, Jacket, disc and gasket as specified are also provided.

 

MODEL NO.

DESCRIPTION

 

            022/1

Cloud & Pour Single Test Apparatus

$ 42

            022/2

Cloud & Pour Single with Insulated Body

$ 46

            022/3

Cloud & Pour Point Four Test with Insulated Body

$ 71

            022/4

Cloud & Pour Point Six with Insulated Body

$ 92

            022/5

Cloud & Pour Point App. For - 30C with REFRIGERATION SYSTEM (single)

$ 1583

            022/6

Cloud & Pour Point App. For - 30C (for 2 test App.)

$ 1875

            022/7

Cloud & Pour Point Thermometer IP 1C

$ 6

            022/8

Cloud & Pour Point Thermometer IP 2C

$ 7

            022/9

Spare Glass Jar with cork

$ 6

          022/10

Spare Metal Jacket with Disc

$ 7

          022/11

Polish wooden case for above except refrigeration model.

$ 33

 

BHI-OPT-024

DROP POINT OF GREASE APPARATUS 

 [As per IP 31 & 132 and ASTM D-566 Specifications]

 

 As per IP 31 the apparatus Consists of Brass Sleeve and case with          metal cup and a glass Boiling tube with Cork fitted to a bath 600 ml beaker  is provided. The assembly is kept on heater with energy Regulator control and stand with F.H.P. elect Stirrer. As per IP 132 the unit Comprises a glass beaker with fiber Cover together  with glass test tube with three indentations to receive Chromium plated brass  cup cork for tube and a 1.5 mm diameter         Brass rod. The assembly is kept on  heater with energy regulator and         stand with F.H.P.  motor stirrer.

 

 

MODEL NO.

DESCRIPTION

 

            024/1

Drop point Apparatus as per IP 31

$ 125

            024/2

Drop point Apparatus as per IP 132 & ASTM D 566 

$ 133

 

MODEL NO.

OPTIONAL ACCESSORIES

 

            024/a

IP 40C Low range Thermometer

$ 5

            024/b

IP 41C High range Thermometer

$ 5

            024/c

IP 62C Drop Point Special Thermometer

$ 6

 

BHI-OPT-026

KINEMATIC VISCOMETER BATH

(IP-71 AND IS 1448)

This viscometer bath is used to maintain the correct constant Temperature for estimating kinemetic Viscosity of Oils & Petroleum product. In this  type of bath Various Viscometers may be fixed as an internal part of bath. The bath is rectangular in shape. Inside tank made of Stainless steel sheet. On two sides toughened glass provided for full visibility of objects. The bath is controlled by an electronic relay and contact thermometer. Temperature Range 5C above room temperature to 100 C. Accuracy   0.1C Stirring is  Done by a F.H.P. elect. motor stirrer. It is Supplied             with Viscometer tube holders and S.S. cover.

 

 

MODEL NO.

DESCRIPTION

 

              026/1

Kinematic Viscometer Bath of chamber Size 12 * 9 * 12 deep to Accommodate 4 Viscometer

$ 375

              026/2

Same as above-but chamber Size 12 * 12 * 12 deep to Accommodate 6 Viscometer

$ 425

              026/3

Same as above-but with Digital Temp. Indicator and controller

$ 583

              026/4

Kinematic Viscometer Bath of chamber Size 18 * 12 * 12 deep to Accommodate 4 Viscometer

$ 542

              026/5

Same as above-but with Digital Temp. Indicator and controller

$ 708

 

OPTIONAL ACCESSORIES

 

            026/a

Electric FHP pump unit for circulation of bath liquid in place of FHP motor stirrer

$ 46

            026/b

Copper Coil for Circulation of Chilled water

$ 21

            026/c

Lighting Attachment

$ 21

            026/d

U Tube Viscometer Type B S/U

$ 21

            026/e

U Tube Viscometer Reverse flow Type BS/IP/RF

$ 21

            026/f

Suspended Level Viscometer Type BS/IP/SL

$ 21

            026/g

Cannon Fenske Viscometer Type BS/IP/CF

$ 23

            026/h

Cannon Fenske Viscometer for opaque liquids

$ 23

            026/I

Spare Universal Viscometer Holder

$ 8

 

Note: Please mention Size and Viscosity range of Viscometer tube with indent.

 

BHI-OPT-028

FLOW CUP VISCOMETER

Flow cup viscometer as per IS 101 B-4 type complete with stand and      leveling screws for adjustment.

 

 

 

DESCRIPTION

 

            028/1

Flow cup viscometer

$ 46

            028/2

Spare brass cup with B-4 Jet

$ 38

 

BHI-OPT-030

CARBON RESIDUE APPARATUS (RAMSBOTTOM)

 

It is made as per IP 14, ASTM 524 and IS 1448 (P:8)- 1967 Standards. It is used to determine the amount of carbon deposit when oil evaporated under specified condition. The apparatus consists of a solid metal bath having 5 wells to accommodate cocking bulbs, the heavy duty heating elements provided around the bath. Supplied with 5 cocking bulbs, and one syringe.

 

 

 

DESCRIPTION

 

            030/1

Rams bottom Carbon Residue Apparatus with temp. regulation by energy Regulator, thermocouple and Pyrometer

$ 375

            030/2

Rams bottom Apparatus Compact type heat regulation by VOLTAGE VARRIER (COPPER COIL)

$ 458

            030/3

Rams bottom Compact type unit Solid state ELECTRONIC TEMPERATURE controller and Digital Temperature indicator unit

 

$ 542

 

DESCRIPTION

 

           030/a

Spare Cocking bulb

$ 3

           030/b

Spare heating element for above

$ 83

           030/c

Spare syringe

$ 4

 

BHI-OPT-032

CARBON RESIDUE APPARATUS (CONRADSON)

 

It is made as per IP 13, ASTM D-189 Specifications. It is used to determine  the amount of carbon residue when oil is evaporated under specified  condition. The Carbon residue valves of crude Oil, residuum etc. These  are useful in the manufacture of various lubricants. The            apparatus consists  of spun sheet iron crucible 25cc Capacity, Sheet Iron hood and sheet iron block on a stand with triangular wire, and gas Burner.

 

 

 

DESCRIPTION

 

            032/1

Conradson Carbon Residue single Test Apparatus

$ 67

            032/2

Conradson Carbon Residue Four Test Apparatus

$ 158

 

BHI-OPT-034

REID TEST  APPARATUS VAPOUR PRESSURE

 

Made as per IP 69 & IS 1448 (P: 39). 1967 elect. Heated with FHP motor   Stirrer and Contact thermometer and Relay (without Bomb. and   accessories)

 

034/1

034/2   

034/3

 

034/4

 

034/5   

034/6

034/7

Single Test Bath

 Double Test Bath

Vapour Pressure Bomb Consisting of one Air Chamber one Gasoline Chamber without Cock

NP Pressure Gauge for above of any range 0-15 psi or 0-30 psi or 0-45 psi  or 0-60 psi            

Spare Air Chamber

Spare Gasoline Chamber without Cock

Spare Gasoline Chamber with Cock

$ 333

$ 375

$ 208

 

$ 19

 

$ 113

$ 71

$ 92

 

BHI-OPT-036

COPPER STRIP CORROSION TEST APPARATUS

 

Double walled stainless steel chamber bath outer chamber made of mild    steel sheet attractive painted. As per IP 154 and IS 1448(P-15) to    accommodate 6 Bombs. Temperature is controlled by Electronic Digital   Temperature Controller (Without S.S. Bomb)

 

 

 

COPPER STRIP CORROSION TEST BATH

$ 333

 

 

Optional accessories

 

            036/a

Stainless Steel Bomb

$ 42

            036/b

Vice Single Strip

$ 8

            036/c

Vice Six Strip

$ 25

            036/d

Copper Strip (pack of 3)

$ 5

            036/e

Inspection Tube

$ 15

            036/f

 

Test Tube

$ 3

BHI-OPT-038

PENETROMETER APPARATUS

 

This apparatus is used for penetration test on a wide variety of materials such as greases, petroleum, bitumen, tar,wax, polish, food stuff, rubber asphalts and pharmaceutical creams. A given force is applied over a given period of times and the depression is made in the sample which is measured in tenths of a millimeter and expressed as penetration. It consists of a head support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of needle tip to sample and in corporates a slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter sub Division. The instrument is supplied with two sample containers.

P.O.R.

BHI-OPT-040

DISTILLATION APPARATUS

( AS PER IP 24, 132 AND IS 1448 P: 8 SPECIFICATIONS)

 

This apparatus is used for determinations of distillation characterstics of petroleum products. The  intrument consists of metal shield to support distillation flask with GEARED HEIGHT ADJUSTABLE DEVICE. It has a slot for vapour tube. A glass window is provided in front side for clear view of  inside objects. It also has cooling bath bath or condensor with M.S. black painted stand.

 

Electrically heated.

 

The instrument is supplied with three square asbestos boards with 38 mm 50mm and 70mm holes. ( without glass wares)

P.O.R.

BHI-OPT-042

BOMB CALORIMETER APPARATUS

 (IP 12 Specifications)

 

It is used for determination of heat of combustion, calorific value and Sulpher contents of solid and liquid fuels. The Bomb body and lid are machined from corrosion resisting Stainless steel rod

Its capacity is appox. 300ml. It is provided with high pressure valuve and electrodes. The Calorimeter vessel water jacket Stirrer FHP motor driven are proivded as per IP Standards. The  bomb calorimeter is supplied with firing unit Beckman thermometer, Pellet Press, ignition wire and pressure gauge on stand with copper pipe fitting magnifying glass.

P.O.R.