SEALING MACHINE HAND OPERATED TABLE MODEL available in
8" sealing length
10" sealing length
12" sealing length
SEALING MACHINE PADDLE OPERATED STANDING MODEL
AUTO CONTINUES SEALING MACHINE TABLE MODEL
motor operated having special feature of Auto Jaw sealing on variable
speeds, suitable for fast & easy operation for pre-pouch having
12" sealing length.
POLY PIPE FILLING & SEALING MACHINE SEMI AUTOMATIC
The poly pipe is converted into pouch having sealing both the sids.
The machine fill and seal 300 to 400 pouches per hour The tube has
to be manually fed in one length. The operation of filling, sealing
and cutting is done in one operation. The machine will have 20 Litre
float balance tank .
Poly pipe sealing and manual filling machine. The liquid is been
measured and filled in to the hopper. Sealing and tube cutting operation
will be paddle operated in one shot.
POUCH FILLING & SEALING MACHINE SEMI AUTOMATIC
Semi Automatic Pouch Packing Machine for Milk. This Machine fill
and seal 300 to 400 Pouches per hour. The preformed pouches are
to be manually fed however the operation of the filler and sealer
are by pressing separate levers. The machine will have SS construction.
POUCH FILLING MACHINE AUTOMATIC
To fill and seal 1200 Packs per Hour. The cabinet is built on a
stainless steel chassis. All Milk contact parts made from stainless
steel complete automatically controlled by electronic circuits.
YOGHURT/LIQUID FILLING & SEALING MACHINE SEMI AUTOMATIC
Semi Automatic Yoghurt/liquid Packing Machine for Milk. This Machine
fill and seal approx. 300 cups per hour. The cups are to be manually
fed and the filling will be done automatically, manually cups has
to be taken under the sealer for sealing operation. Tolerance +-
The motor will be directly coupled to the pump having 2900 RPM
and TEFC design reputed make suitable for operation on Single/ 3
phase. 50 Hz 400/440 Volts. A.C. Supply All the parts of the pump
coming into direct contact with milk will be of stainless steel
of AISI 304 quality and will be finished to dairy standards. The
motor portion will be S.S shrouded. The shroud will have air circulation
holes and cable entry. The pumps will be fitted over 3 nos. SS legs
.......... as above.......... but with Milk Pump 1 HP
.......... as above.......... but with Milk Pump 2 HP
.......... as above.......... but with Milk Pump 3 HP