UNIVERSAL TESTING MACHINES

BHI-900

VARIETY OF TESTS- TENSION, COMPRESSION & TRANSVERSE.CONTINUOUS ROLL; AUTOGRAPHIC "LOAD-ELONGATION" RECORDER.VARIOUS MODELS MAX.CAPACITY RANGING FROM 10 TO 300 TONES.OPTIONAL ACCESSORIES INCLUDE LOAD STABILIZER, ATTACHMENTS FOR BRINELL TEST, BEND TEST AND SHEAR TEST.SPECIAL ACCESSORIES OFFERED ON REQUEST.LOADING ACCURACY WELL WITHIN +- 1%.

UNIVERSAL TESTING MACHINES

BHI-910


MACHINES PROVIDED WITH ELECTRONIC DIGITAL DISPLAY FOR LOAD AND ELONGATION. FACILITY TO HOLD PEAK-LOAD AND TARE FACILITY TO MAKE LOAD ZERO.ELONGATION DISPLAY CAN BE SET TO ZERO.OPTIONAL PRINTER FACILITY.ALL OTHER FACILITIES MENTIONED UNDER MODEL UTN.

COMPRESSION TESTING MACHINES

BHI-916


STRAINING AT VARIABLE SPEEDS TO SUIT A WIDE RANGE OF MATERIALS.VARIOUS MODELS-MAX. CAPACITY FROM 50 TO 500 TONNE.WIDE RANGE OF STANDARD AND SPECIAL ACCESSORIES INCLUDING LOAD STABILIZER. CONTINUOUS ROLL AUTOGRAPHIC RECORDER TO STUDY BEHAVIOR OF MATERIALS.LOADING ACCURACY WILL WITHIN +- 1%

 

CONCRETE COMPRESSION MACHINES

BHI-920


THE LOAD FRAME IS OF FOUR COLUMN CONSTRUCTION WITH A FIXED UPPER HEAD HOLDING THE BALL SEATED PLATEN.THE TESTING OF CONCRETE CUBES UP TO 150MM, LOAD GAUGE IS CALIBRATED IN KILONEWTONS AND IS FITTED WITH A MAXIMUM LOAD POINTER.A CHART IS SUPPLIED TO ENABLE THE RAPID CONVESION, EACH MACHINE AND GUAGE ARE CALIBRATED, CORRECT TO +- 1%, THE RANGE FROM 10% TO 100% OF MAXIMUM LOAD.

CONCRETE COMPRESSION MACHINES

BHI-930

THE LOAD FRAME IS OF FOUR COLUMN CONSTRUCTION WITH A FIXED UPPER HEAD HOLDING THE BALL SEATED PLATEN.THE TESTING OF CONCRETE CUBES UP TO 150MM, LOAD GAUGE IS CALIBRATED IN KILONEWTONS AND IS FITTED WITH A MAXIMUM LOAD POINTER.A CHART IS SUPPLIED TO ENABLE THE RAPID CONVESION, EACH MACHINE AND GUAGE ARE CALIBRATED, CORRECT TO +- 1%, THE RANGE FROM 10% TO 100% OF MAXIMUM LOAD.

CONCRETE COMPRESSION MACHINES

BHI-935


THE MOST IMPORTANT METHOD OF CHECKING THE QUALITY OF CONCRETE IS THE COMPRESSION STRENGTH TEST, WHERE A CONCRETE CUBE OR CYLINDER IS CRUSHED TO FAILURE UNDER A KNOWN LOAD.THE SPECIMEN LOAD.THIS MEANS THAT WHEN TESTING CONCRETE AT A STRENGTH OF 70 N/MM2 (10000 LBF/IN2) USING A 150MM CUBE, THE FAILING LOAD WILL BE 1575 KN, REQUIRING A LOAD FRAME OF AT LEAST 2000 KN CAPACITY.BRITISH STANDARD BS 1881:1970.

 

TENSILE TESTING MACHINE

BHI-945


TENSILE TESTING MACHINES ARE USED TO CHECK THE BREAKING LOAD (TENSILE STRENGTH) & ELONGATION OF FERROUS & NON-FERROUS MATERIALS, WIRES & CABLES, ALUMINIUM & COPPER CONDUCTOR, WOOD, RUBBER, PLASTICS, PAPER BOARD, LEATHER & CLOTH. ELECTRICALLY OPERATED.

AUTOMATIC SIEVES SHAKER

BHI-1125

FOR USE WITH 150,200,300,450MM,DIAMETER SIEVES.BUILT WITH A CAST IRON BODY FITTED WITH AN INCLINED TABLE TO ACCOMODATE UP TO SIX TEST SIEVES EACH WITH 50MM HEIGHT ABOVE THE MESH,WITH A STANDARD LID AND RECEIVER.THE OPERATING MECHANISM IS TOTALLY ENCLOSED WITHIN AN OIL BATH,FITTED WITH A VISUAL OIL LEVEL INDICATOR,ELECTRIC MOTOR MOUNTED ON THE BASE OF THE MACHINE AND COUPLED DIRECT TO THE MAIN SHAFT,APPROXIMATELY 300 VIBRATIONS PER MINUTE.A BUILT-IN TIME SWITCH,OPERATION UP TO 60 MINUTES DURATION X 1 MINUTE INTERVAL.

TORSION TESTING MACHINES

BHI-975



THE MOST IMPORTANT METHOD OF CHECKING THE QUALITY OF CONCRETE IS THE COMPRESSION STRENGTH TEST, WHERE A CONCRETE CUBE OR CYLINDER IS CRUSHED TO FAILURE UNDER A KNOWN LOAD.THE SPECIMEN LOAD.THIS MEANS THAT WHEN TESTING CONCRETE AT A STRENGTH OF 70 N/MM2 (10000 LBF/IN2) USING A 150MM CUBE, THE FAILING LOAD WILL BE 1575 KN, REQUIRING A LOAD FRAME OF AT LEAST 2000 KN CAPACITY.BRITISH STANDARD BS 1881:1970.

 

 

 
 

All Rights Reserved © Bellstone-Hitech-International