BOURDEN TUBE PRESSURE GAUGES
( General Purpose in Steel Case )


JTM-8500




BOURDEN TUBE PRESSURE GAUGES ARE USED WITH
LIQUID, GASES, AIR &
OIL MANUFACTURED IN
DRAWN STEEL CASE
WITH BOTTOM / BACK
CONNECTION AND DIRECT SURFACE OR FLUSH, PANEL MOUNTING. STANDARD
RANGES FROM 0 TO 30 PSI
AND UPTO 15,000 PSI. IN DIFFERENT DIAL SIZE 40 MM,
50, 63, 80, 100, 150, 200, 250,
300 MM. CAN BE MANUFACTURED FROM
BRASS, COPPER, ALLOY, BERYLLIUM COPPER,
ALLOY STEEL AND
STAINLESS STEEL,
ACCURACEY ± 1.5%, OR ± 2 %.

DIAPHAGRAM GAUGES



JTM-8550


THE CAST ALUMINIUM DIPHASGRAM GAUGES ARE SUITABLE FOR USE WITH GASES
OR LIQUID MEDIA. THE GAUGES
ARE AVAILABLE WITH OPEN FLANGE FOR MEASURING VI
SCOUS OR CRYSTALLISING
FLUIDS, A CONCENTRICALLY CORRUGATED DIAPHAGRAM IS HELD BETWEEN TWO FLANGES.
THE RISING PRESSURE PUSHES
THE DIAPHAGRAM UPWARDS.
THE DEFLECTION IS IN DIRECT PROPORTION TO THE PRESSURE APPLIED. DIAPHAGRAM OF
SPRING STEEL, STAINLESS
STEEL AND TEFLONE.
DIAL SIZE : 100 MM, 150 MM, RANGES FROM 1000 MMWC
TO 21 KG/CM2.

BELLOW GAUGE
( Compact Capsule Gauges )



JTM-8800





THE GAUGES ARE SUITABLE
FOR GASEOUS, AIR MEDIA AND
LIQUID MEDIA.THE BELLOWS
ARE FASTENED TO THE INSIDE
REAR WALL OF THE CASE HORIZONTALLY TO THE DIAL.
THE EXPANSION IS IN DIRECT SELATION TO THE APPLIED PRESSURE, WEATHER PROOF CASE.
DIAL SIZE : 100 MM, 150 MM, RANGES, OUR ALL STANDARD RANGES.
     

INDUSTRIAL WEATHERPRO OF GAUGES
( Aluminium case )



JTM-8600

WITH PHOSPHORE, BRONZE, STEEL, STAINLESS STEEL BOURDEN, BLOW OFF DISC WITH MICROMETER POINTER. THE GAUGES ARE SUITABLE FOR THERMAL POWER, CHEMICAL PLANTS, FERTILIZER PLANTS, REFINERIES FOR OUTDOOR AND IN THE FIELD.
DIAL SIZE : 100, 150, 200, 250, 300 MM, RANGE : 760 MM TO 0-1000 KG. OR 15,000 PSI.

CAPSULE GAUGE FOR LOW PRESSURE




JTM-8650



USED FOR LOW PRESSURE CALIBRATED IN MM WC OR M. BAR OR INCHES OF WATER COLUMN. THE CAPSULE IS FORMED WITH TWO DIAPHAGRAM DULY WELDED. THE MEDIUM ENTERS THE BELLOWS THROUGH A HOLE IN THE CONNECTING SHANK. THE EXPANSION IS IN DIRECT RELATION TO THE APPLIED PRESSURE.
DIAL SIZE : 150 MM, 200 MM,
RANGE : 0-50 MM WC, UPTO 1000 MM WC IN PRESSURE, VACCUM AND COMPOUND.

TEST GAUGES



JTM-8850



THESE GAUGES ARE USE IN INDUSTRIES AND LABORATORY FOR INSPECTION. EVERY TEST GAUGES APPOINT BY POINT TEST CERTIFICATE OF THE READING OF THE GAUGE ON IT'S FINAL TEST TAKEN UNDER STANDARD TEST CONDITION.
Accuracy ± 0.5 % of F.S.D.,
Dial size : 150, 200, 250 mm.

     
GLYCERINE / LIQUID OR OIL FILLED GAUGES

JTM-8700




THESE GAUGES ARE SUBJECTED TO AGGRESSIVE ENVIROnmental condition, Vibration proof, suitable for any type Bourden. These gauges can be filled with glycerine or oil when gauges are subjected to high pulsation pressure and vibration. It's lubricate the complete gauge which stands in longer life.
Dial size : 100, 150, 200 mm Range : As per out standard ranges.
DIPHAGRAM SEALED GAUGES

JTM-8650


THESE GAUGES ARE SUITABLE FOR WHERE HIGHLY CORROSIVE, CONTAMINATED, VISCOSE INSIDE THE MEASURING SYSTEM. THE GAUGE ABOVE THE DIAPHAGRAM SEAL IS FITTED SUITABLE OIL WHICH TRANSMIT THE PRESSURE ACTINGON THE DIPHAGRAM TO THE BOURDEN TUBE. THE UPPER DIPHAGRAM IS DULY SEALED AND THE MATERIAL FOR DIAPHAGRAM IS AISI 316 L OR SPECIAL ALLOY. THE GAUGE AND DIAPHAGRAM CAN BE REPUATED UPTO 6 METER LENGTH.
DIAL SIZE : 100 MM, 150 MM, 200 MM
.

TRANSMITTING PRESSURE GAUGES

JTM-9100




THESE GAUGES ARE USED FOR LONG RANGE TRANSMISSION OF PRESSURE MEASURING AND CONTROL INSTRUMENTS FROM PLANT TO THE CONTROL ROOM THROUGH AN ELECTRICAL SIGNAL. THE ELECTRICAL TRANSMITTER IS INSTALLED ON THE GAUGE AND ATTACHED TO THE POINTER,IT'S STANDARD RESISTANCE IS 100 OHMS IN FULL SCALE. DIAL SIZE : 100 MM, 150 MM, 200 MM.

     
MASTER TEST AND PRCEISION GAUGES


JTM-9000

SUITABLE FOR INDUSTRIAL AND LABORATORY INSPECTION WITH HIGH ACCURACY ± 0.0.25 % E. S. D. OF RANGES WITH PRECISE BOURDEN AND RACK PINION.
DIAL SIZE : 150 MM, 200 MM, 250MM.
RANGE : ALL OUR STANDARD RANGES.
ELECTRICAL CONTACT PRESSURE GAUGES




THESE CONTACT GAUGES SERVE
TO ON-OFF OR SIGNAL MEASURED VALVES AND TO CONTROL MACHINE AND PLANTS. THESE CONTACTS ARE AVAILABLE WITH SINGLE OR DOUBLE CONTACTS. THE CONTACTS ASSEMBLIES ARE MOUNTED ON THE DIAL AND CAN BE ADJUSTED OVER THE ENTIRE MEASURING RANGE.
DIAL SIZE : 100, 150, 200, 250 MM.
RANGE : AS PER OUR STANDARD RANGES.
DIFFERENTLY PRESSURE GAUGES




JTM-9150

THESE DIFFERENTLY GAUGES CONSISTS ESSENTIALLY OF TWO BOURDEN TUBES EACH HAVING IT'S OWN CONNECTION, BUT OPERATING A COMMON POINTER WHICH SHOWS BETWEEN THE TWO PRESSURE. EACH BOURDEN TUBE CAN TAKE MAXIMUM PRESSURE OF 1:3 TIMES, THE MAXIMUM RANGE SHOWN ON THE DIAL, THE GAUGE HAVE A ZERO AT THE CENTRE.
DIAL SIZE : 150 MM, 200 MM.
RANGE : ALL OUR STANDARD RANGES.
PREVIOUS

All Rights Reserved © Bellstone-Hitech-International