ELECTRICAL TRANSMITTER PRESSURE GAUGES
JTM-9100


SPECIFICATION:
PRINCIPAL: ELECTRILCAL RESISTANCE WITH MEASURED VARIABLE.
CHANGE IN RESISSTANCE: 100 OHMS FOR FULL SCALE DEFLECTION.
CONTACTS: NOBLE METAL. RESISTANCE MATERIAL:GOLD ALLOY OR SPECIAL RESISTANCE ALLOY DEPENDING ON RANGE. RECEIVER INSTRUMENT: CAN BE CROSS-COIL OR MOVING COIL INDICATOR
CASE MATERIAL: HIGH INPUT PLASTIC, CAST ALUMINIUM.
EDGEWISE PRESSURE GAUGE

JTM-9300

A. NON-FERROUS DIAPHRAGM OPERATED: EDGEWISE TYPE 250MM (10") MINIMUM: 0-100MM WG MAZIMUM : 0-1.4 LG/CM2
B. CASE: DIE-CAST ALUMINIUM ALLOY MOISTURE PROOF CASE, HEACILY ENAMELLED BLACK AND STOVED.
C. EDGEWISE GAUGES: 250MM (10") SUITABLE FOR FLUSH PANEL MOUNTING .
SCALE LENGTH: 250MM (10") EDGEWISE .......217MM (8 3/4")
EDGEWISE GAUGES: 1/4" BSP (M) WITH UNION NUT AND NIPPLE.
ORIENTATION: BOTTOM
D. ACCURACY:
DIAPHAGRAM OPERATED GAUGES:
± 2% FOR EDGEWISE GAUGES.
PRESSURE GAUGE MAX. INDICATOR

JTM-9350



SPEECIFICATION / DIMENSION AS PER MODEL JTM-8500/8600
     
PRESSIRE GAUGE SQUARE TYPE

JTM-9400

RANGE AS PER MODEL JTM-8850
ACCESSORIES

GAUGE SAVER

GAUGE SAVER IS KNOWN AS OVERLOAD PROTECTOR OR PRESSURE LIMITING VALUE. IT CUTS OFF PRESSURE RISES ABOVE THE DESIRED PRESSURE VALUE BEING PRE-SET VALUE, THUS PREVENTING FAILURE OF PRESSSURE GAUGE AND ALSO STOPS POSSIBLE DAMAGES SUCH AS HAZARDOUS LEAKAGES AND EXPLOSIONS ETC.
NEEDLE VALVE


     
GAUGE COCK


PULSATION DAMPNER



UNIVERSAL PULSATION DAMPNER SHOULD BE USED WHEN PRESSURE FLUCTUATIONS WHCIH MAKE THE POINTER VIBRATE AND DIFFICULT TO READ.
MATERIAL: BRASS / STAINLESS STEEL
PRESSURE SNUBBER


TO SAVE THE INSTRUMENTS FROM GETTING DANAGED DUE TO SEVERE LINE PULSATIONS AND PRESSURE SURGES, TO PROTECT THE ACCURACY AND TO INCREASE THE LIFE OF THE INSTRUMENT.
EACH SNUBBER IS SUPPLIED WITH PISTON OF THREE DIFFERENT DIAMETERS. DEPENDING ON VISCOSITY OF THE FLUID AND AMOUNT OF THE DAMPENING DESIRED, POSITION SIZE SHOULD BE SELECTED.SNUBBERS CAN BE USED FOR PRESSURE, VACCUM OR COMPOUND GAUGES AND MATERIAL SHOULD BE SELECTED DEPENDING ON APPLICATION.
MATERIAL: BRASS / STAINLESS STEEL.
PREVIOUS

All Rights Reserved © Bellstone-Hitech-International