use or medical and laboratory use.
Accurate using Microcontroller Technology
- 3 Point
Calibration using curve fitting software.
results in ppm and meq
MICROPROCESSOR BASED FLAME PHOTOMETER, MODEL BHI-LSR-438 is
an idea instrument for the determination of sodium, Potassium, Dalcium
and Lithium. It uses the latest Microcontroller technology and advanced
engineering techniques so as to give enhanced accuracy and reproducibility.
The system has 3 point calibration facility using curve fitting
software. It has soft touch membrane keys for ease of operation.
The solution is aspirated through an atomiser. Air sample and the
fuel are mixed in the mixing chamber which is the sprayed as a very
fine mist into the flame. The color of the flame is changed depending
upon the concentration of elements present. Radiations from the
flame passes through the sensing system and specific narrow band
interference filter which permits only the characteristic radiation
to pass to the photo-detector. The output of the photo-detector
is then processed by the microcontroller and the final results are
displayed on the digital display.
0.1 to 100
0.1 to 100
15 to 100
0.5 to 100
1% up to 40 ppm
± 2% above 40 ppm
digit seven segment bright red LED display
& dry oil free air
± 10% AC, 50 Hz
oil free mini compressor unit with pressure regulator
Holder (5 No.S), Dust Cover, Mains Lead, Chimney, Capillary
Tubes (3 No. S), Air and Gas Tubing along with End clamps
(1 set), cleaning Wire, Instruction Manual
UV/VIS Spectrophotometer, Semi Auto Analyser, Microprocessor
pH System, Spectrophotometer, Microprocessor Based Flame Photometer,
Water & Soil Analysis Kit, Digital Photo Colorimeter,
Filter Photo Colorimeter, Digital pH Meter, Nephelo/Turbidity
Meter Microprocessor Based K.F. Titrimeter, Digital D.O. Meter,
Digital Conductivity / TDS Meter, Temperature Indicator, Digital
Telethermometer Digital Salinity Meter,Portable Instruments.