Model No.

ROCKWELL HARDNESS TESTER/SYSTEM

Price in U.S $

 

BHI-MAT-102

Automatic load selection with automatic zero setting dial gauge. Manual Operation

 

$ 368

Loads

60, 100, 150

Initial Load

10

Max Test Height

230 mm

Depth of Throat

133 mm

Max. Depth of elevation screw Below base

240 mm

Size of Base (Approx)

171 x 423

Machine Height

635 mm

Net. Weight (Approx)

75 kg

 

 

Model No.

ROCKWELL/BRINELL COMBINED SYSTEM

 

 

BHI-MAT-104

Automatic load selection with automatic zero setting dial gauge. Facility for Brinell Tests with 187.5 kgf. Load with 2.5 mm ball indentor, additional load 250 kgf. With 5 mm ball indentor for testing hardness of non ferrous metals. Manual Operation.

 

$ 539

Loads

60 , 100 , 150 , 187.5, 250

Initial Load

10

Max Test Height

230 mm

Depth of Throat

133 mm

Max. Depth of elevation screw Below base

240 mm

Size of Base (Approx)

171 x 423

Machine Height

635 mm

Net. Weight (Approx)

75 kg

 

 

Model No.

ROCKWELL HARDNESS TESTER/SYSTEM

 

 

 BHI-MAT-106

Simlar to BHI-MAT-102  but motorised model. Semiautomatic operation for production testing. Drive motor single phase 230V 50 cycles.

 

 

$ 539

Loads

60 , 100 , 150 ,

Initial Load

10

Max Test Height

230 mm

Depth of Throat

133 mm

Max. Depth of elevation screw Below base

240 mm

Size of Base (Approx)

171 x 423

Machine Height

635 mm

Net. Weight (Approx)

75 kg

 

 

Model No.

 ROCKWELL/BRINELL COMBINED SYSTEM

Price

 

BHI-MAT-108

Similar to BHI-MAT-104 but bigger capacity Diamond Hoklder is guided in a set of two ball cage, which enables testing of small pins having dia. Less than 6 mm (upto 3 mm dia)

 

$ 685

Loads

60 , 100 , 150 , 187.5, 250

Initial Load

10

Max Test Height

295 mm

Depth of Throat

150 mm

Max. Depth of elevation screw Below base

310 mm

Size of Base (Approx)

210 x 470

Machine Height

845 mm

Net. Weight (Approx)

137 kg

 

Model No.

ROCKWELL/ROCKWELL SUPERFICIAL COMBINED SYSTEM

 

 

BHI-MAT-110

Manual load selection with automatic zero setting dial gauge Manual Operation. Diamond Holder is guided in a set of two ball cage, which enables testing of small pins having dia. Less than 6 mm (upto 3 mm dia)

 

$ 744

Loads

15 , 30 , 45 (Rockwell Superficial) 60, 100 , 150 (Rockwell)

 

Initial Load

3 (Rockwell Superficial) 10 (Rockwell )

 

Max Test Height

295 mm

Depth of Throat

150 mm

Max. Depth of elevation screw Below base

310

Size of Base (Approx)

210 x 470

Machine Height

845

Net. Weight (Approx)

126 kg

 

 

 

 

Model No.

BRINELL HARDNESS TESTER

 

 

BHI-MAT-112

Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measures depth of ball penetration. This facilitates production testing with in tolerance limits by compression method.

 

$ 1286

Loads

500 to 3000 stages of 250

Initial Load

250 kgf

Max Test Height

410 mm

Depth of Throat

200 mm

Max. Depth of elevation screw Below base

180 mm

Size of Base

370 x 670 mm

Machine Height

1127 mm

Net. Weight (Approx)

450 kg

Drive Motor

0.33 -  415v/p HP

 

Model No.

BRINELL HARDNESS TESTER

 

 

BHI-MAT-114

Simplest model of Brinell Hardness tester with mechanical Design. Loading, unloading manual, Best suitable for testing batch quantities.

 

$ 777

Loads

500 to 3000 stages of 250

Initial Load

Nil

Max Test Height

254 mm

Depth of Throat

150 mm

Max. Depth of elevation screw Below base

0 mm

Size of Base

255 x 495 mm

Machine Height

860 mm

Net. Weight (Approx)

210 kg

Drive Motor

Nil.

 

 

Model No.

BRINELL HARDNESS TESTER

 

 

BHI-MAT-116

Basic machine design and operation similar to B – 3000 (H). In addition, an ‘optical device’ with 14x magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. The indentor swivels and projects dia of ball impression immediately after unloading operation which avoids additional time for measurement of ball impression. This gives real Brinell number on production testing.

 

$ 2770

Loads

500 to 3000 stages of 250

Initial Load

Nil

Max Test Height

380 mm

Depth of Throat

200 mm

Max. Depth of elevation screw Below base

180 mm

Size of Base

370 x 670 mm

Machine Height

1185 mm

Net. Weight (Approx)

500 kg

Drive Motor

0.33 -  415v/p HP

 

 

 

 

 

UNIVERSAL  TESTING MACHINES

Model

BHI-MAT-118

BHI-MAT-120

BHI-MAT-122

BHI-MAT-124

BHI-MAT-126

 

Maximum capacity (tonne)

10

20

40

60

100

1st Measuring Range (Tonne)

0-1

0-2

0-4

0-6

0-10

Minimum graduations (kgf)

2

4

10

10

20

2nd measuring Range (tonne)

0- 2.5

0-5

0-10

0-12

0-25

Minimum Graduations (kgf)

5

10

25

20

50

3rd measuring Range (Tonne)

0-5

0-10

0-20

0-30

0-50

Minimum Graduations (kgf)

10

20

50

50

100

4th measuring Range (Tonne)

0-10

0-20

0-40

0-60

0-100

Minimum Graduations (kgf)

20

40

100

100

200

Clearnce for Tensile at fully descended working piston (mm)

50-700

50-700

50-700

50-800

50-850

Clearance for compression test at fully descended working piston

0-700

0-700

0-700

0-800

0-850

Clearance between columns (mm)

500

500

500

600

750

Ram stroke (mm)

150

200

200

250

250

Straining/piston speeds

0-300

0-150

0-150

0-100

0-80

CONNECTED LOAD

 

 

 

 

 

HP

1.5

1.5

2.5

2.5

3.5

V

400-440

400-440

400-440

400-440

400-440

Ǿ

3

3

3

3

3

Dimension LxWxH(approx mm)

2032x750x1960

2032x750x1960

2060x750x2180

2265x750x2534

2415x815x2900

Weight (approx ) (kg)

1500

1500

2500

3500

5500

STANDARD ACCESSORIES

 

 

 

 

 

For tension test

 

 

 

 

 

Clamping jaws for round specimens diameter (mm)

10-20

20-30

10-20

20-30

10-25

25-40

10-25

25-40

40-55

10-25

25-45

45-70

Clamping jaws for flat specimens thickness (mm)

0-10

10-20

0-10

10-20

0-15

15-30

0-15

15-30

0-22

22-44

44-65

Width

50

50

65

70

70

For compression test

 

 

 

 

 

Pair of compression plates of diameter (mm)

120

120

120

120

160

For transverse test

 

 

 

 

 

Talbe with adjustable rollers width of rollers (mm)

160

160

160

160

160

Diameter of rollers (mm)

30

30

30

50

50

Maximum clearance between supports

500

500

500

600

800

Radius of punch tops (mm)

6 , 12

6 , 12

12 ,16

16, 22

16 ,22

 

MODEL

PRICE

PRICE

 

 

MECHANICAL

ELECTRONICS

 

BHI-MAT-118

$ 4462

$ 6650

 

BHI-MAT-120

$ 5250

$ 7437

 

BHI-MAT-122

$ 6300

$ 8487

 

BHI-MAT-124

$ 8662

$ 10850

 

BHI-MAT-126

$ 13125

$ 15312

 

 

 

 

 

 

 

 

 

 

Model No.

Tensile Testing machines

 

 

BHI-MAT-128/945

Tensile Testing machines are used to check the breaking load (Tensile Strength ) & Elongation of ferrous & non- ferrous materials, wires & cables, aluminium & copper conductor, wood, rubber, plastics, paper board, Leather & Cloth. Electrically operated.

$ 1354

 

 

Measuring Range

0 –25       Kgf    x 50    gm

0 –50       Kgf    x 100  gm

0 –100     Kgf    x 200  gm

 

Min. Max Grip Separation

25 – 1000 mm

 

Accuracy

± 1% between 10% & 90% max. scale range

 

Power Supply

025 KW Single / 3 Phase (as required )

 

 

Safety Limit Switches

Incorporated for both the directions.

 

 

 

 

 

 

 

 

 

Model No.

Tensile Testing machines

Price

BHI-MAT-128/950

Measuring Range

0-50 Kgf x 100 gm

0-100 Kgf x 200 gm

0-250 Kgf x 500 gm

$ 1354

Min. Max Grip Separation

25 – 1000 mm

Accuracy

± 1% between 10% & 90% max. scale range

Power Supply

0.5 KW Single / 3 Phase (as required )

Safety Limit Switches

Incorporated for both the directions.

 

 

Model No.

Tensile Testing machines

Price

BHI-MAT-128/955

Measuring Range

0-100 Kgf x 200 gm

0-250 Kgf x 500 gm

0-500 Kgf x 1000 gm

$ 1562

Min. Max Grip Separation

25 – 750 mm

Accuracy

± 1% between 10% & 90% max. scale range

Power Supply

0.75 KW Single / 3 Phase (as required )

Safety Limit Switches

Incorporated for both the directions.

 

Model No.

Tensile Testing machines

Price

BHI-MAT-128/960

Measuring Range

0-250 Kgf x 500 gm

0-500 Kgf x 1000 gm

0-1000 Kgf x 2000 gm

$ 1666

Min. Max Grip Separation

25 – 750 mm

Accuracy

± 1% between 10% & 90% max. scale range

Power Supply

1.0 KW  3 Phase 440 Volts

Safety Limit Switches

Incorporated for both the directions.

 

Model No.

Tensile Testing machines

Price

BHI-MAT-128/965

Measuring Range

0-500 Kgf    x  1   Kgf

0-1000 Kgf  x  2   Kgf

0-2500 Kgf  x  5   Kfg

$ 2083

Min. Max Grip Separation

25 – 750 mm

Accuracy

± 1% between 10% & 90% max. scale range

Power Supply

1.5 KW  3 Phase 440 Volts

 

Safety Limit Switches

Incorporated for both the directions.

 

 

Model No.

Tensile Testing machines

Price

BHI-MAT-128/970

Measuring Range

0-1000 Kgf x 2 Kgf

0-2500 Kgf x 5 Kgf

0-5000 Kgf x 10 Kgf

$ 2291

Min. Max Grip Separation

25 – 750 mm

Accuracy

± 1% between 10% & 90% max. scale range

Power Supply

1.5 KW  3 Phase 440 Volts

Safety Limit Switches

Incorporated for both the directions.

 

Model No.

Tensile Testing machines

Price

BHI-MAT-128

Measuring Range

0-1000 Kgf x 2 Kgf

0-2500 Kgf x 5 Kgf

0-5000 Kgf x 10 Kgf

0-10000 kgf

$ 2708

Min. Max Grip Separation

25 – 750 mm

Accuracy

± 1% between 10% & 90% max. scale range

Power Supply

1.5 KW  3 Phase 440 Volts

Safety Limit Switches

Incorporated for both the directions.

 

 

 

BHI-MAT-130

IMPACT TESTING MACHINE

  Machine is designed for conducting CHARPY, 1Z0D and        IMPACT Tensions test.The Impact energy absorbed by the specimen during rupture is measured as the difference between the height of drop before rupture of the test specimen and is read on the dial scale.Release of Pendulum by ‘Two Hand Operation’.Safety Guards for protection. Breaking arrangement is provided for stopping the pendulum

  A unique standard of accuracy, easy operations, reliability and   

  consistency.

 

                      130/A

 With heavy base ( Casting ) for  Charpy, Izod Test 

$ 1297

                      130/B

With Light base ( Casting) for Charpy , Izod Test

$ 1239

 

BHI-MAT-132

PORTABLE HARDNESS TESTING MACHINE ( Digital)

 

 

It is an advance integrated hardness tester distinguished by its very compact size, high accuracy, wide measuring range & simplicity of operation. It is suiatable for testing the harness of all metals. It automatically computes all Vickers, Brinell, Rockwell or Shore harness values. The impact direction can be set so that accurate values can be achieved at any angle.

Hardness Scales : HRC, HRB, HRA, HV, HB, HS & HL

Combined impact device  & digital display - No cables

Measures in any direction

Re-chargeable

Size : 150 x 22 x53mm

Impact energy : 11Nmm

Test tip : Tungsten Carbide

Measuring accuracy : mean uncertainty ±4.5%

Maximum hardness of sample : 980 HV

Weight : 130gm

With a complete test block, plastic cover, charger and instruction manual.

$ 1500

BHI-MAT-134

ULTRASONIC CONCRETE TESTER

 

Portable Ultrasonic Concrete Tester is used for assessing the strength of concrete either in situ or precast. It complies with the British Standard BS04408  and ASTM C-597. It is designed with field conditions and is very simple to operate. Its accuracy & stability is unmatched. The instrument generates low frequency pulses and measures the time of flight in the material. The time is displayed by 5 digit display. The time of flight and hence velocity is related to the mechanical strength of concrete. The majority of concrete testing requires transducers with frequency of 50 to 100 kHz. However higher frequencies are preferred for testing small specimens and achieving better timing accuracy.  Wide range of transducers are offered with Portable Ultrasonic Concrete Tester. The high quality of transducers has been exploited to the fullest extent and the accuracy of the measurement is improved over the entire range to 100 nano seconds.

 

SPECIFICATIONS

Test Mode                         :              Through Transmission mode

Range                                :               0.1 µ sec. To 9999.9 µ sec.

Measurement  Units          :               Time

Resolution                         :               0.1 µ sec.

Calibrated  Accuracy        :                0.1 µ sec.

Display                             :                5 digit LED, Fixed Decimal Point

Transducers                      :                Contact type

Operating Temperature    :                 0ş to 50şC

Power                               :                 7.2 V.D.C. or 230 V. Mains

Display Response Time   :                 Instantaneous

Zero Adjust                      :                 Through Multiturn Potentiometer

Battery Low Indication    :                 Battery Low Indication

Dimensions                      :                 250 x 65 x 260 mm

Weight                             :                 2.8 Kgs. approx.

STANDARD ACCESSORIES

1 set of 7.2 volt NICAD Cells

Charger

Probe Cables : 2 Nos. (4 mts. Each)

 Transducers: PC200 - 0.1 (2 Nos)

                                            (2” diameter, 100kHz)

 

$ 2485

BHI-MAT-136

AUTOMATIC LEVEL

 

High contrast analytical optical system with 3 element coated object lens and dual pattern glass reticule, push bottom device ±2mm, heavy-duty automatic level, 24x /32x, telescope magnification, shortest focusing distance 70cm friction-braked rotation, fine-motion drive screw, Parallel Plate Micrometer for better accuracy for LAL – 2 only

P.O.R.

BHI-MAT-138

AUTOMATIC LEVEL

High contrast analytical optical system with 3 element coated object lens and dual pattern glass reticule, push bottom device ±2mm, heavy-duty automatic level, 24x /32x, telescope magnification, shortest focusing distance 70cm friction-braked rotation, fine-motion drive screw, Parallel Plate Micrometer for better accuracy for LAL - 2 only

 

P.O.R.

BHI-MAT-140

Bellstone Micro Optic Theodolite is a highly precise micro optic  instrument. It has a horizontal scale made of glass 7 readings are taken through a microscope by super  imposition of the diametrically oposite graduations through a system of prisms/2 lenses with an accuracy of 10 seconds directly, vertical scale is made of silver with vernier to read up to 20”, lapped vertical steel axes and optical plummet. Aperture of objective 30mm, Magnification 25x, Stadia Ratio 1:100, Additional Constant 0 (zero), Telescope length 200mm, Nearest focusing distance 2.5mm, Horizontal scale (glass), Vertical scale (Silver).

P.O.R.

BHI-MAT-142

Theodolite is a compact instrument of fully enclosed design and is rigidly mounted on the base plate, The telescope mounted on the horizontal axis is of the internal focusing type & reversible          either way. The horizontal and vertical scales, Magnification 25x Equivalent focal length 200mm Stadia Ratio 1:100, Additional constant 0(Zero), Shortest focusing distance 2.4 Meters clear          aperture of Objective lens of aperture of Objective lens 38mm Horizontal scale, Diameter 125mm, Vertical Scale, Diameter 100mm, in metallic dome case, in a wooden box, the tripod stand.

P.O.R.

BHI-MAT-200

CARBON BLACK CONTENT TESTER

 

General :

Carbon Black Content Tester has been designed incorporating many features and new ideas. The aparatus conforms to the most generally recognised National & international standards including BIS, IS, ASTM etc.

 

Introduction : The method depends on the fact that non-polar olefin polymers, when heated in inert atmosphere (e.g.oxygen free nitrogen). undergo a pyrolytic depolymerisation, breaking down into smaller molecules which can be the furnace and it has been demonstrated that they may be recovered quantitatively by this method.

 

Basic Unit : Carbon Content Tester is controlled by "Digital Temperature Controller" Steered by a Platinum / Platinum - Rhodium Thermocouple and combining a temp. indicator with the setting          scale. The furnace contains 2.0Kw heating element wound on a tubuler " Quartz" tube which is heavily insulated within a fire-bricks & glass-wool casing. A fused quartz "Combustion" tube, which          is twice as long as the furnace, is kept inside the furnace heating tube. This tube contains the "Boat" in which is pyrolised. The rubber corks with glass-tube are also provided at the both ends of the "combustion" tube. The wash bottles with trap unit are filled with pyrogallol/KOH solution, trichloro ethylene and kept at the sides of the apparatus. After the Nitrogen Carrier, a Gas Flow-meter and U-Tube (filled with CaCI3 is connected with pyrogallo/KOH solution .

 

 

BHI-MAT-210

OIL SEAL TORQUE MEASUREMENT SYSTEM

                          (For Rotary shaft seals)

 

Calibrates frictional loss of energy due to radial load of lip on shaft in dynamic condition.

 

Digital temperature indicator controller to heat Test media temperature upto 120° C.

 

Multiple speed pulley drive.

 

Electronic digital load sensing device.

 

BHI-MAT-212

OIL SEAL ENDURANCE TESTER

 

Conforms to IS 5125/SAE J110

 

Checks 2 Seals at a time

 

Standard features - Temperature Controller Hour Totalizer, and Multiple Pulley speed variation.

 

BHI-MAT-214

OIL SEAL LIP OPENING PRESSURE TEST RIG

                          (For Rotary shaft seals)

 

Conforms to SAE J.946 Air flow method.

 

For fast NON DESTRUCTIVE, 100% Checking in less than 10 seconds per seal.

 

Reflects cumulative effect of ovality, eccentricity, Lip dia, spring tension etc.

 

Range : Max sea O.D. 300 mm

 

Import substitution Award Winner.

 

BHI-MAT-216

OIL AND FUEL FILTER TEST RIGS

 

Test Rigs conforming to SAE J-905 & J-806

 

Efficiency Test Rig for Filter Assembly

 

Flow V/S Pressure Drop Test Rig for Filter Assembly.

 

Bubble Tester for Filter Elements.

 

Bursting strength Tester for Paper Filter Element.

 

BHI-MAT-218

CENTRE LINE HEIGHT /CRUSH TESTER FORHALF

                       BEARING AND SPLIT BUSHES

 

Totally indigenous.

 

Available either in Hydraulic or Pneumatic loading systems.

 

Equivalent to available imported testers.

 

BHI-MAT-220

SPRING TESTER

 

Motorised Tester with electronic load cell.

 

Digital display for load and deflection

 

Platen traverse 20-300 mm.

 

Suitable for tension and compression testing

 

Operates on 220 V. A.C.

 

ALSO AVAILABLE FOR TORSION SPRINGS.

 

BHI-MAT-222

UNIVERSAL TESTING MACHINE

 

FEATURES :

 

Versatile machine for testing compression and tension forces.

 

2 speed motorized machine with sensitive electronic Load & Length Indicators.

 

Peak-hold feature.

 

Tare Set facility to off-set dead weights.

 

APPLICATIONS :

 

Pull-out force checking for connectors, plug in PCBs etc.

 

Tensile testing of crimped terminals.

 

Operational/Actuating force checking of electrical switches, aerosol cans, etc.

 

Testing of Rubbers, Plastics, Fibres, Filaments, etc.

 

BHI-MAT-224s

GEAR ROLL TESTER

 

Double Flank Contact roll of Component Gear against master Gear.

 

Rugged construction using stress relieved Graded Cast Iron Castings.

 

Designed for shop floor conditions.

 

Accepts spur, helical and Involute gears.

 

Well protected Bell crank Lever Pivot Assembly.

 

BHI-MAT-226

MINI GEAR ROLL TESTER

 

Floating Carriage Mechanism

 

Stress Relieved Cast Iron Components

 

Accepts, Spur, Helical, and Involute gears.

 

Worm and Worm Screw attachment, vertical attachment, extension plate & motorised drive  optional.

 

 

BHI-MAT-228

GEAR TOOTH CHAMFERING MACHINE FOR GEARS                      SPLINES, AND OTHER PROFILES

 

Suitable for fast chamfering of gears and splines.

 

Suitable for spur, Helical & Bevel, gears.

 

Easy to operate and safe to use

 

Save Compressed air during changeover.

 

Uses maintenance free pneumatic geinder for better performance.

 

BHI-MAT-232

OTHER PRODUCTS

 

 Semi-Automatic strapping machine

 

Quick Thread Checking machine -ROTOCHECK.

 

Tip Removal Machine -TIPSOMATIC.

 

Pump Test Rigs.

 

Comprssion strength checking for packing materials - viz paper boards, bottles, cartons, etc.